To Next Page

To Previous Page

Use one of these methods to turn the projector on or off:

 When the Spro2‟s screen is turned on, swipe up or down

using THREE fingers on the screen to turn on or off the

projector.

 Drag the status bar down from the top of the screen and

touch Projector on the top of the notification panel.

 From the HOME tab of the home screen, touch the round

button on the Projector widget.

 From the SETTINGS tab of the home screen, touch

Projector > Control and then touch the switch next to

Projector in the Projector settings screen.

NOTE: For best results, project onto a non-reflective white

flat display surface at a 90° angle to Spro2‟s touch screen.

The projection distance of Spro2 is about 3 to 12 feet.

Adjusting the Projection

When the projector is on, you can adjust projection focus,

keystone distortion, projection brightness, and projection color.

To adjust projection focus:

1. Touch Home > SETTINGS > Projector > Image.

2. In the Focus section, turn on automatic focus or touch “+” and

“-” to make manual adjustment.

NOTE: Press the Power button twice quickly to adjust projection

focus automatically.

Other manuals for Zte Spro2

Questions and Answers:

Need help?

Do you have a question about the Zte Spro2 and is the answer not in the manual?

General