Zte ZXR10 5250-28SM User Manual

ZXR105250SeriesCommandReference
Default
Theforcedpower-onfunctionisdisabled.
Example
Thefollowingexampleenablestheforcedpower-onfunctionforport1.
zte(cfg)#setpoeport1/1forcepowerenable
4.3.5setpoeportextend-detection
Purpose
Thiscommandenablesordisablestheportextend-detectionfunction.
CommandMode
Globalcongurationmode
Syntax
setpoeport<portlist>extend-detection{enable|disable}
ParameterDescription
ParameterDescription
<portlist>Portlist.
enableEnablestheextend-detectionfunction.
disableDisablestheextend-detectionfunction.
Guidelines
Iftheextend-detectionfunctionisenabled,powersupplywillbeprovidedforportswhen
non-standardPDdevices(suchasCiscohigh-capacitydevices)aredetected.Ifthe
extend-detectionfunctionisdisabled,powersupplywillbeprovidedforportsonlywhen
standardPDdevicesaredetected.
Default
Theextend-detectionfunctionisdisabled.
Example
Thefollowingexampleenablestheextend-detectionfunctionforport3:
zte(cfg)#setpoeport1/3extend-detectionenable
4-66
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential

Zte ZXR10 5250-28SM Specifications

General

Model	ZXR10 5250-28SM
Switching Capacity	128 Gbps
Forwarding performance	95.2 Mpps
Forwarding Rate	95.2 Mpps
MAC Address Table	16K
Jumbo Frame Support	9K Bytes
Storage Temperature	-40°C to 70°C
Power Supply	AC 100-240V, 50/60Hz
Dimensions (W x D x H)	440mm x 260mm x 44mm
Weight	3.5 kg
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (non-condensing)
Storage Humidity	5% to 95% (non-condensing)
Ports	24x 10/100/1000BASE-T, 4x 100/1000BASE-X SFP