Zte ZXR10 5250-28SM User Manual

Chapter4ServiceConguration
4.36.3udldportmessagetimer
Purpose
ThiscommandsetsthepacketsendingperiodaftertheUniDirectionalLinkDetection
(UDLD)protocolentersBiDirectionalstatus.
CommandMode
Globalcongurationmode
Syntax
udldport<portlist>messagetimer<7-90>
ParameterDescription
ParameterDescription
<portlist>Portlist.
messagetimer<7-90>Interval(seconds)thatpacketsaresent.
Guidelines
AftertheUDLDprotocolenterstheBiDirectionalstatus,itsendsveHellohandshake
messagesattheperiodofsevenseconds,andthencontinuouslysendsHellohandshake
messagesattheintervalconguredbythiscommand.
Default
15seconds.
4.36.4udldportrecoveryenable/disable
Purpose
ThiscommandenablesordisablestheUDLDautomaticrecoveryfunction.
CommandMode
Globalcongurationmode
Syntax
udldport<portlist>recovery{enable|disable}
ParameterDescription
ParameterDescription
<portlist>Portlist.
4-535
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential

Zte ZXR10 5250-28SM Specifications

General

Model	ZXR10 5250-28SM
Switching Capacity	128 Gbps
Forwarding performance	95.2 Mpps
Forwarding Rate	95.2 Mpps
MAC Address Table	16K
Jumbo Frame Support	9K Bytes
Storage Temperature	-40°C to 70°C
Power Supply	AC 100-240V, 50/60Hz
Dimensions (W x D x H)	440mm x 260mm x 44mm
Weight	3.5 kg
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (non-condensing)
Storage Humidity	5% to 95% (non-condensing)
Ports	24x 10/100/1000BASE-T, 4x 100/1000BASE-X SFP