Zte ZXR10 5250-28SM User Manual

ZXR105250SeriesCommandReference
Remote-ID:EnabledFormat:Manual
Value:123456789012345678901234567890123456789012345678901234567890123456789
01234567890123456789012345678901234567890123456789012345678
Subscriber-ID:Disabled
Reserve:Disabled
Option82mode:Default
Port1/2:
DHCPoption82isdisabledonport1/2.
4.25.20showdhcpoption82device
Purpose
Thiscommandshowsdeviceinformation,includingANIandremote-ID.
CommandMode
Allcongurationmodes
Syntax
showdhcpoption82device
Example
Thefollowingexampleshowsthecurrentdeviceinformation:
zte(cfg)#showdhcpoption82device
DHCPoption82sub-optioninformationondevice:
Access-Node-Identifier:-
Remote-ID:Cisco
4.25.21setdhcpclientenable/disable
Purpose
ThiscommandenablesordisablestheDHCPclientfunction.
CommandMode
Globalcongurationmode
4-444
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential

Zte ZXR10 5250-28SM Specifications

General

Model	ZXR10 5250-28SM
Switching Capacity	128 Gbps
Forwarding performance	95.2 Mpps
Forwarding Rate	95.2 Mpps
MAC Address Table	16K
Jumbo Frame Support	9K Bytes
Storage Temperature	-40°C to 70°C
Power Supply	AC 100-240V, 50/60Hz
Dimensions (W x D x H)	440mm x 260mm x 44mm
Weight	3.5 kg
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (non-condensing)
Storage Humidity	5% to 95% (non-condensing)
Ports	24x 10/100/1000BASE-T, 4x 100/1000BASE-X SFP