Zte ZXR10 5250-28SM User Manual

Chapter4ServiceConguration
Syntax
setdhcpclient{enable|disable}
ParameterDescription
ParameterDescription
enable
EnablestheDHCPclientfunction.Layer-3portscanapplyforIP
addressesautomatically.
disableDisablestheDHCPclientfunction.
Default
TheDHCPclientfunctionisdisabled.
4.25.22setdhcpclientbroadcast-flagenable/disable
Purpose
ThiscommandsetswhethertheDHCPservertakesabroadcastprocedurewhenreplying
toapacket.
CommandMode
Globalcongurationmode
Syntax
setdhcpclientbroadcast-flag{enable|disable}
ParameterDescription
ParameterDescription
enable
TheDHCPservertakesabroadcastprocedurewhenreplying
toapacket.
disable
TheDHCPserverdoesnottakeabroadcastprocedurewhen
replyingtoapacket.
Default
TheDHCPserverdoesnottakeabroadcastprocedurewhenreplyingtoapacket.
4.25.23showdhcpclient
Purpose
ThiscommandshowsthecongurationoftheDHCPclient.
4-445
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential

Zte ZXR10 5250-28SM Specifications

General

Model	ZXR10 5250-28SM
Switching Capacity	128 Gbps
Forwarding performance	95.2 Mpps
Forwarding Rate	95.2 Mpps
MAC Address Table	16K
Jumbo Frame Support	9K Bytes
Storage Temperature	-40°C to 70°C
Power Supply	AC 100-240V, 50/60Hz
Dimensions (W x D x H)	440mm x 260mm x 44mm
Weight	3.5 kg
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (non-condensing)
Storage Humidity	5% to 95% (non-condensing)
Ports	24x 10/100/1000BASE-T, 4x 100/1000BASE-X SFP