Zte ZXR10 5250-28SM User Manual

Chapter4ServiceConguration
4.13.35ingress-aclhybridruletype-ipv6-any
Purpose
ThiscommandsetstherulethatthehybridingressACLmatchestheIPv6packet.
CommandMode
HybridingressACLcongurationmode
Syntax
rule<1-500>{permit|deny}ipv6any{<source-ipv6addr><sipv6-mask>|any}[<destination-ipv
6addr><dipv6-mask>|any][<vlan-id>]
ParameterDescription
ParameterDescription
<1-500>Rulenumber.
permitIftheconditionmatches,accessispermitted.
denyIftheconditionmatches,accessisdenied.
ipv6any
ThisruleisonlyvalidforIPv6packet.Otherpacketsignorethis
rule.
<source-ipv6addr>
IPv6Sourcenetworkorhostofthetransmittedpackage.The
standardIPv6addressformatisused,suchasabcd:EF12::1234.
<sipv6-mask>
Sourcemaskandusedforsource.Itisexpressedbyaninteger.
Therangeis1to128.
any(rst)
MatchesallsourceIPv6addresses,sourceandsourcemaskare
all0s.
<destination-ipv6addr>
ThedestinationnetworkorhostaddressofthetransmittedIPv6
packet.ThestandardIPv6addressformatisused,suchas
abcd:EF12::1234
<dipv6-mask>
Destinationmask.Itisusedfordestinationandrepresentedby
oneinteger.Thevaluerangeis1to128.
any(second)
MatchesalldestinationIPv6addresses.Thedestinationand
destinationmaskareall0s.
<vlan-id>
ThisruleisonlyvalidformessageswiththespeciedVLANID.
Ignorethisruleforothermessages.TheruleofVLANIDis1
to4094.
Guidelines
TheIPv6-anyrulecanmatchsource-speciedIPv6,anysourceIPv6,destination-specied
IPv6,anydestinationIPv6,andVLANelds.
4-247
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential

Zte ZXR10 5250-28SM Specifications

General

Model	ZXR10 5250-28SM
Switching Capacity	128 Gbps
Forwarding performance	95.2 Mpps
Forwarding Rate	95.2 Mpps
MAC Address Table	16K
Jumbo Frame Support	9K Bytes
Storage Temperature	-40°C to 70°C
Power Supply	AC 100-240V, 50/60Hz
Dimensions (W x D x H)	440mm x 260mm x 44mm
Weight	3.5 kg
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (non-condensing)
Storage Humidity	5% to 95% (non-condensing)
Ports	24x 10/100/1000BASE-T, 4x 100/1000BASE-X SFP