Zte ZXR10 5250-28SM User Manual

Chapter4ServiceConguration
ParameterDescription
<sipv6-mask>
Sourcemaskandusedforsource.Itisexpressedbyaninteger.
Therangeis1to128.
any(rst)
MatchesallsourceIPv6addresses,sourceandsourcemaskare
all0s.
<destination-ipv6addr>
ThedestinationnetworkorhostaddressofthetransmittedIPv6
packet.ThestandardIPv6addressformatisused,suchas
abcd:EF12::1234
<dipv6-mask>
Destinationmask.Itisusedfordestinationandrepresentedby
oneinteger.Thevaluerangeis1to128.
any(second)
MatchesalldestinationIPv6addresses.Thedestinationand
destinationmaskareall0s.
dest-port<0-65535>
TCPdestinationportnumberofthetransmittedpacket
Thedest-portparameterresolvesomeknownportnumber.Also
theportnumberandmaskcanbeentered.
<dport-mask>Destinationportmask.
<vlan-id>
ThisruleisonlyvalidformessageswiththespeciedVLANID.
Ignorethisruleforothermessages.TheruleofVLANIDis1
to4094.
Guidelines
TheIPv6-TCPrulecanmatchsource-speciedIPv6,anysourceIPv6,
destination-speciedIPv6,anydestinationIPv6,TCPsourceportnumbers,TCP
destinationportnumbers,andVLANelds.
4.13.34ingress-aclhybridruletype-ipv6-udp
Purpose
ThiscommandsetstherulethatthehybridingressACLmatchestheIPv6-UDPpacket.
CommandMode
HybridingressACLcongurationmode
Syntax
rule<1-500>{permit|deny}ipv6udp{<source-ipv6addr><sipv6-mask>|any}[source-port<0
-65535><sport-mask>]{<destination-ipv6addr><dipv6-mask>|any}[dest-port<0-65535><dpor
t-mask>][<vlan-id>]
4-245
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential

Zte ZXR10 5250-28SM Specifications

General

Model	ZXR10 5250-28SM
Switching Capacity	128 Gbps
Forwarding performance	95.2 Mpps
Forwarding Rate	95.2 Mpps
MAC Address Table	16K
Jumbo Frame Support	9K Bytes
Storage Temperature	-40°C to 70°C
Power Supply	AC 100-240V, 50/60Hz
Dimensions (W x D x H)	440mm x 260mm x 44mm
Weight	3.5 kg
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (non-condensing)
Storage Humidity	5% to 95% (non-condensing)
Ports	24x 10/100/1000BASE-T, 4x 100/1000BASE-X SFP