Zte ZXR10 5250-28SM User Manual

Chapter4ServiceConguration
ParameterDescription
ParameterDescription
<1-65535>Timeoutdurationoftheauthenticationclientsystem
Default
30seconds.
Example
Thefollowingexamplesetsthetimeouttimeto60seconds:
zte(cfg-nas)#dot1xsupplicant-timeout60
4.20.7dot1xserver-timeout
Purpose
Thiscommandsetsthetimeoutdurationwhentheauthenticationsystemreceivesadata
packetfromtheauthenticationserver.
CommandMode
NAScongurationmode
Syntax
dot1xserver-timeout<1-65535>
Parameter
ParameterDescription
<1-65535>Timeoutduration(seconds)oftheauthenticationserver
Default
30seconds.
4.20.8dot1xmax-request
Purpose
Thiscommandsetstheovertimeretransmissiontimesofchallengeresponsesreceivedby
theauthenticationsystemfromtheclientsystem.
CommandMode
NAScongurationmode
4-383
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential

Zte ZXR10 5250-28SM Specifications

General

Model	ZXR10 5250-28SM
Switching Capacity	128 Gbps
Forwarding performance	95.2 Mpps
Forwarding Rate	95.2 Mpps
MAC Address Table	16K
Jumbo Frame Support	9K Bytes
Storage Temperature	-40°C to 70°C
Power Supply	AC 100-240V, 50/60Hz
Dimensions (W x D x H)	440mm x 260mm x 44mm
Weight	3.5 kg
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (non-condensing)
Storage Humidity	5% to 95% (non-condensing)
Ports	24x 10/100/1000BASE-T, 4x 100/1000BASE-X SFP