Zte ZXR10 5250-28SM User Manual

ZXR105250SeriesCommandReference
3.13AutomaticallySavingCongurationFiles
3.13.1setauto-saveconfigenable/disable
Purpose
Thiscommandenablesordisablesthefunctionthattheswitchautomaticallyuploads
congurationlestotheTFTPserver.
CommandMode
Globalcongurationmode
Syntax
setauto-saveconfig{enable|disable}
ParameterDescription
ParameterDescription
enableEnablesthefunction.
disableDisablesthefunction.
Guidelines
Thefunctioncanbeenabledonlyafterserveripbecomesvalidwiththesetauto-saveconfig
serverip<A.B.C.D>command.Wheneverthefunctionisdisabled,previouslysetserverip
andperiodareautomaticallyrestoredtothedefaultvalues.
Default
Thisfunctionisdisabled.
3.13.2setauto-saveconfigserverip
Purpose
ThiscommandcongurestheIPaddressoftheTFTPservertowhichtheswitch
automaticallyuploadscongurationles.
CommandMode
Globalcongurationmode
Syntax
setauto-saveconfigserverip<A.B.C.D>
3-12
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential

Zte ZXR10 5250-28SM Specifications

General

Model	ZXR10 5250-28SM
Switching Capacity	128 Gbps
Forwarding performance	95.2 Mpps
Forwarding Rate	95.2 Mpps
MAC Address Table	16K
Jumbo Frame Support	9K Bytes
Storage Temperature	-40°C to 70°C
Power Supply	AC 100-240V, 50/60Hz
Dimensions (W x D x H)	440mm x 260mm x 44mm
Weight	3.5 kg
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (non-condensing)
Storage Humidity	5% to 95% (non-condensing)
Ports	24x 10/100/1000BASE-T, 4x 100/1000BASE-X SFP