Zte ZXR10 5250-28SM User Manual

Chapter5ManagementConguration
ParameterDescription
ParameterDescription
enableEnablestheZDP .
disableDisablestheZDP .
Default
TheZDPisenabled.
5.6.2setzdpport/trunkenable/disable
Purpose
ThiscommandenablesordisablestheZDPonports/trunks.
CommandMode
Clustermanagementcongurationmode
Syntax
setzdp{port<portlist>|trunk<trunklist>}{enable|disable}
ParameterDescription
ParameterDescription
port<portlist>Portlist
trunk<trunklist>Trunklist.
enableEnablestheZDP .
disableDisablestheZDP .
Default
TheZDPisenabled.
Example
ThefollowingexampledisablestheZDPonport2:
zte(cfg-group)#setzdpport2disable
5.6.3setzdptimer
Purpose
ThiscommandsetsthetimeintervalforsendingZDPpackets.
5-39
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential

Zte ZXR10 5250-28SM Specifications

General

Model	ZXR10 5250-28SM
Switching Capacity	128 Gbps
Forwarding performance	95.2 Mpps
Forwarding Rate	95.2 Mpps
MAC Address Table	16K
Jumbo Frame Support	9K Bytes
Storage Temperature	-40°C to 70°C
Power Supply	AC 100-240V, 50/60Hz
Dimensions (W x D x H)	440mm x 260mm x 44mm
Weight	3.5 kg
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (non-condensing)
Storage Humidity	5% to 95% (non-condensing)
Ports	24x 10/100/1000BASE-T, 4x 100/1000BASE-X SFP