Ordering German ISDN BRI Services 79
Ordering German
ISDN BRI Services
To order German ISDN services, follow these steps:
1 Acquire a form entitled “Telefondienstauftrag im ISDN
(Euro-ISDN-Anschluß)” from the Telekom.
2 At the top of the form, select “Neuanschluß.”
3 Under “Auftraggeber,” provide the requested information.
4 Under “Anschluß,” specify “Basisanschluß als Standardanschluß.”
By specifying “Basisanschluß als Standardanschluß, “ you are requesting
standard basic rate interface (BRI) service. Under “Anschrift Standort,”
provide the requested information.
5 Under “Anschlußnutzung,” specify “Mehrgeräteanschluß.”
By specifying “Mehrgeräteanschluß,” you are requesting a connection for
multiple types of equipment, such as bridge/routers, telephones, faxes,
and computers.
6 Sign your name at the bottom of the form.
The SuperStack II bridge/router software does not currently support the
1TR6 switch type. If you have an existing 1TR6 connection, request that
the connection be changed to a Euro-ISDN connection using this form. In
case the Telekom requests this information, the approval number for
Germany (Bundesamt Für Zulassungen In Der Telekommunikation) is
A115352E.
When ordering ISDN lines in Germany, make sure to order
point-to-multipoint ISDN lines. The SuperStack II bridge/router does not
support point-to-point configurations when attached to the German
ISDN network.
HWBook Page 79 Friday, June 19, 1998 3:42 PM
To Next Page
Loading...
Need help?
General