ABB ACS800-04 User Manual

The ACS800-04/U4 and ACS800-04M
18
Type code
The type code contains information on the specifications and configuration of the
drive. The first digits from left express the basic configuration (e.g. ACS800-04-
0170-5). The optional selections are given thereafter, separated by plus signs (e.g.
+E202). The main selections are described below. Not all selections are available for
all types. For more information, refer to ACS800 Ordering Information (EN code:
64556568, available on request).
Type code for ACS800-04 and ACS800-U4 pre-assembled units
Selection Alternatives
Product series ACS800 product series
Type 04 Drive module. When no options are selected: 6-pulse diode input bridge, IP 00, top
entry, side exit, RDCU drive control unit, no control panel, no EMC filter, Standard
Control Program, boards without coating, pedestal with output on the long side, output
busbar set for motor, base and wall mounting brackets, one set of manuals. Pre-
assembled unit.
U4 Drive module (USA). When no options are selected: 6-pulse diode bridge, open
chassis, top entry, side exit, no control panel, no EMC filter, US version of the
Standard Control Program (three-wire start/stop as default setting), common mode
filter in frame size R8, boards without coating, pedestal with output on the long side,
output busbar set for motor, base and wall mounting brackets, one set of manuals.
Pre-assembled unit.
Size Refer to Technical data: IEC ratings or NEMA ratings in Hardware Manual [3AFE64671006
(English)].
Voltage range
(nominal rating in bold)
2 208/220/230/240 VAC
3 380/400/415 VAC
5 380/400/415/440/460/480/500 VAC
7 525/575/600/690 VAC
+ options
Resistor braking D150 brake chopper and busbars for brake resistor and DC connection
Filter E210 EMC/RFI filter for second environment TN/IT (grounded/ungrounded) system
E208 common mode filter
Pedestal and output
busbars
0H354 no pedestal
Control panel J400 control panel including a 3-metre panel connection cable
J410 RPMP-11 control panel mounting platform kit including a 3-metre panel connection
cable but no control panel
J413 RPMP-21 control panel holder
Fieldbus K... Refer to ACS800 Ordering Information (EN code: 64556568).
I/O L...
Control program N...
Language of manual R...
Specialities P901 coated boards
Safety features Q950 Prevention of Unexpected Start, 500 mm (19.68 in.) cable outside the drive module in
frame size R7, 600 mm (23.62 in.) cable outside the drive module in frame size R8.

ABB ACS800-04 Specifications

General

Brand	ABB
Model	ACS800-04
Category	Controller
Language	English