Memory module
239
1SVC 440 795 M0100
Memory module The module is available as an accessory CL-LAS.MD003 for
CL-LSR/CL-LST and CL-LMR/CL-LMT.
Compatibility of memory modules MD001 and
MD002
Circuit diagrams with all the data can transferred to the
CL-LSR/CL-LST and CL-LMR/CL-LMT from the MD001 and
MD002 memory module. A transfer, however, in the other
direction is not possible.
Each memory module saves one CL circuit diagram.
Information stored on the memory module is “non-volatile”
and thus you can use the module to archive, transfer and
copy circuit diagrams.
The memory module can be used for saving
• the circuit diagram
• all parameter sets of the function relays
• all display texts with functions
• the system settings,
– Input delay
– P buttons
– Password
– Retention on/off,
•card start
• summer time start/end time settings
X The memory module is fitted in the opened interface
provided for it.
To Next Page
Loading...
Need help?
General
