Inside the display system
382
1SVC 440 795 M1100
Memory module
The module is available as an accessory CL-LAD.MD004 for
the display system.
Circuit diagrams with all the data can be transferred to the
display system from the CL-LAD.MD004 memory module.
Each memory module stores a display system program.
Information stored on the memory module is “non-volatile”
and thus you can use the module to archive, transfer and
copy programs.
The memory module can be used for saving:
• The program,
• All the visualization data of the screens,
• All parameter settings of the circuit diagram,
– The system settings,
– Debounce setting,
– P buttons,
– Password,
– Retention on/off and range,
– CL-NET configuration,
– Setting for automatic startup in Terminal mode
–COM-LINK settings,
– DST settings,
– Memory module start.
X The memory module is fitted in the opened interface
provided for it.
To Next Page
Loading...
Need help?
General
