xx0700000048
Warning label concerning high temperature (2 pcs)A
Warning label, symbol of a flash (located on motor cover) (1 pcs)B
Warning label concerning brake releaseD
Serial no. from rating labelG
Warning label concerning stored energyH
Label calibrationI
Warning label concerning shutting off powerJ
Abs-Acc information signK
Danger label concerning clamping riskL
Required tools and equipment
Visual inspection, no tools are required.
Inspecting, labels
NoteAction
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the robot working area.
1
Inspect the labels, located as shown in the figures.2
Article numbers for the labels and
plate set is specified in Spare part
lists on page 387.
Replace any missing or damaged labels.3
Product manual - IRB 6660 135
3HAC028197-001 Revision: S
© Copyright 2007-2018 ABB. All rights reserved.
3 Maintenance
3.3.8 Inspecting the information labels
Continued
To Next Page
Loading...
Need help?
General