System Utilities 2-13
BIOS Flash Utilities 0
BIOS Flash memory updates are required for the following conditions:
New versions of system programs
New features or options
Restore a BIOS when it becomes corrupted.
Use the Flash utility to update the system BIOS Flash ROM.
If a Crisis Recovery Disc is not available, create one before Flash utility is used.
Do not install memory related drivers (XMS, EMS, DPMI) when Flash is used.
Use AC adaptor power supply when running Flash utility. If battery pack does
not contain power to finish loading BIOS Flash, do not boot system.
Perform the following to run Flash.
1. Rename the BIOS file as “XXXXXXX.FD”.
2. Copy the “XXXXXXX.FD” file to a bootable USB device containing the Crisis Recovery
disk files.
3. Turn off the computer.
4. Insert the USB device containing the renamed BIOS file and the Crisis Recovery disk files
to any USB port.
5. Press and hold the Fn + Esc keys (this is the BIOS recovery hotkey), then press the
power button.
6. Release the Fn + Esc keys after POST.
Flash utility has auto execution function.
To Next Page
Loading...
Need help?
General
