AERMEC MULTI CONTROL User Manual

13
4598010_00
GB
Structure of MULTI CONTROL menus
ESC
CBA ED
F I L M NGH
Index Menu Description
A
Unit synoptic
This menu gathers all the information regarding the chillers in the system.
B
DHW synoptic
This menu gathers information concerning production of domestic hot water (this menu is only visible if the
system includes production of domestic hot water).
C
User menu
This menu contains three submenus
F
,
G
and
H
where the user can set the basic user parameters.
D
Setup menu
This menu contains three submenus
I
,
L
,
M
and
N
where the user can set the user/installer
parameters protected by password.
E
Alarms memory
In this menu, the user can access the log of the last 10 alarms triggered in the system.
F
Display menu
In this menu it is possible to set the basic features for the graphical interface.
G
Operating season menu In this menu it is possible to select the chiller functioning mode.
H
Date time menu
In this menu it is possible to set the system time and date.
I
Chiller/HP setup
In this menu it is possible to set the operating parameters of the chillers based on the selected level
(USER or INSTALLER).
L
DHW setup
In this menu it is possible to set the chillers for the production of domestic hot water, based on the selected
level (USER or INSTALLER).
M
System setup
In this menu it is possible to set the parameters for communication of the MULTI CONTROL accessory with
the components of the system (USER or INSTALLER).
N
Plant setup
In this menu it is possible to set management of the chillers for the plant based on the selected level (USER
or INSTALLER).
PASSWORD
PASSWORD:
USER password: 101
INSTALLER password: 303
!
ATTENTION: Incorrect INSTALLER parameter
settings can cause the entire system to
malfunction; only personnel authorised for
assistance or to install the unit is allowed to
modify these parameters.

AERMEC MULTI CONTROL Specifications

General

Brand	AERMEC
Model	MULTI CONTROL
Category	Control Panel
Language	English