39
4598010_00
GB
The second window of the DHW SETUP allows the user to set
consent for simultaneous loads in the system; this function will
make it possible to simultaneously activate (or to prevent this
possibility) both the unit (compressor and electric resistance
inside the unit) and the supplementary electric resistance
RAS inside the DHW storage tank; this window displays the
following information:
- Simultaneous load enabling (
1
): indicates the current
status of simultaneous load enabling during the production
of domestic hot water.
From this window it is possible to:
(1) Enable or disable simultaneous loads: pressing the key
C
will allow you to enter the modifi cation mode and the value will be
highlighted; by pressing the keys
A
or
B
it will be possible to
modify the value currently displayed, while pressing the key
C
will
confi rm this choice; the values that can be set are:
- ON (Enable simultaneous loads);
- OFF (Disable simultaneous loads).
(2) Pass on to the next window:
to go to the next window of this menu, press the key
B
.
(3) Go back to the previous window:
to go back to the previous window of this menu, press the
key
A
.
(4) Exit this window:
press the key
F
to return to the selection of the USER menus.
• Setting simultaneous loads in DHW production (Password 101 or 303):
A
B
C
ESC
D
Enable load
ON
1
Enable load
ON
To Next Page
Loading...
Need help?
General
