AERMEC MULTI CONTROL User Manual

59
4598010_00
GB
The sixth window of the PLANT SETUP allows the user to
set the power threshold percentage (calculated by the
thermostats of the various units) necessary to request the
secondary units to switch on or off; this window displays the
following information:
- Power threshold necessary to switch another unit on
(
1
): indicates the minimum percentage which must be
requested by each thermostat of the active units to be able
to switch another on.
- Power threshold necessary to switch another unit off
(
2
): indicates the maximum percentage which must be
requested by each thermostat of the active units to be able
to switch the last unit off.
From this window it is possible to:
(1) Set an ON/OFF power percentage threshold: pressing the
key
C
will allow you to enter the modifi cation mode and the
percentage threshold to switch another unit on will be highlighted (
1
); by pressing the keys
A
or
B
it will be possible to modify the
value currently displayed, while pressing the key
C
will confi rm
this choice, automatically shifting the cursor to the percentage
threshold for switching off (
2
); by pressing the keys
A
or
B
it will be possible to modify the value currently displayed, while
pressing the key
C
will confi rm this choice.
(2) Pass on to the next window:
to go to the next window of this menu, press the key
B
.
(3) Go back to the previous window:
to go back to the previous window of this menu, press the
key
A
.
(4) Exit this window:
press the key
D
to return to the selection of the USER menus.
• Setting ON/OFF power threshold (Password 101 or 303):
A
B
C
ESC
D
ON/OFF capacity
O F F - > ON Next 000 %
O N - > OFF Next 001 %
ON/OFF capacity
O FF - > ON Next 000 %
O N -> OFF Next 001 %
1
2

AERMEC MULTI CONTROL Specifications

General

Brand	AERMEC
Model	MULTI CONTROL
Category	Control Panel
Language	English