Rockwell Automation Publication 1769-UM021G-EN-P - October 2015 11
Preface
This manual describes the necessary tasks to install, configure, program, and
operate a CompactLogixâ„¢ 5370 controller. This manual is intended for
automation engineers and control system developers.
CompactLogix 5370 controllers are designed to provide solution for small and
medium-sized applications.
Additional Resources
These resources contain information about related products from Rockwell
Automation.
You can view or download publications at
http://www.rockwellautomation.com/literature/. To order paper copies of technical
documentation, contact your local Allen-Bradley distributor or
Rockwell Automation sales representative.
Resource Description
CompactLogix Controllers Specifications Technical Data,
publication 1769-TD005
Provides CompactLogix controller specifications for all CompactLogix controllers.
1769-SDN DeviceNet Scanner Module User Manual, publication 1769-UM009
Describes how to use the 1769-SDN to back up your CompactLogix 5370 L2 or L3 controller.
Compact High-speed Counter Module User Manual, publication 1769-UM006
Describes high-speed counter operation for standalone 1769-HSC when used with L2 and L3
Compact controllers as well as embedded high-speed counters in L2 embedded controllers.
Compact I/O DeviceNet Scanner Module Installation Instructions,
publication 1769-IN060
Describes how to install the Compact I/Oâ„¢ modules.
Compact I/O Expansion Power Supplies Installation Instructions, publication
1769-IN028
Describes how to wire the 1769 Compact I/O power supply.
CompactLogix 5370 L1 Controllers Quick Start, publication IASIMP-QS024
Describes basic tasks to design, install and start a CompactLogix 5370 L1 control system.
CompactLogix 5370 L2 Controllers Quick Start, publication IASIMP-QS025 Describes basic tasks to design, install and start a CompactLogix 5370 L2 control system.
CompactLogix 5370 L3 Controllers Quick Start, publication IASIMP-QS023 Describes basic tasks to design, install and start a CompactLogix 5370 L3 control system.
Ethernet Design Considerations Reference Manual, publication ENET-RM002
Describes the following concepts that you must consider when designing a control system that
includes an EtherNet/IP network:
• EtherNet/IP overview
• Ethernet infrastructure
• EtherNet/IP protocol
EtherNet/IP Embedded Switch Technology Application Guide,
publication ENET-AP005
Describes how to use a DLR network topology.
Execution Time and Memory Use for Logix5000 Controller Instructions
Reference Manual, publication 1756-RM087
Assists in estimating the memory use and execution time of programmed logic and in selecting
among different programming options.
Integrated Motion on the EtherNet/IP Network Configuration and Startup User
Manual, publication MOTION-UM003
Describes how to configure an Integrated Motion over
EtherNet/IP motion application and to start up that motion solution in a Logix5000 control system.
POINT I/O 24V dc Expansion Power Supply Installation Instructions,
publication 1734-IN058
Describes the 1734-EP24DC expansion power supply.
POINT I/O Digital and Analog Modules and POINTBlock I/O Modules User
Manual, publication 1734-UM001
Describes how to return a 1734 POINT I/O module to Autobaud.
POINT I/O Field Potential Distributor Modules Installation Instructions,
publication 1734-IN059
Describes the 1734-FPD POINT I/O Field Power Distributor module.
Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1
Provides general guidelines for installing a Rockwell Automation industrial system.
Product Certifications website, http://www.ab.com Provides declarations of conformity, certificates, and other certification details.
To Next Page
Loading...
Need help?
General
