Appendix D
Supported PCCC Messages
Appendix Objectives Appendix D describes the PCCC object. This object provides a
mechanism for PLC products to utilize native messages across
DeviceNet. The 1203-GK5 module (firmware v2.001 or later) and
1336-GM5 board (firmware v2.001 or later) support the PCCC object
in order to support communications with PLCs and software
programs such as DriveExplorer that support PCCC messages. In this
appendix, you will read about the following:
• PCCC support.
• A list of supported PCCC messages.
PCCC Support The 1203-GK5 module and 1336-GM5 board translate PCCC
messages into SCANport messages. To communicate using PCCC
with the SCANport product, you need a computer running software
such as DriveExplorer that can communicate and translate the PCCC
messages supported by the module and a DeviceNet interface that
will transport PCCC messages over DeviceNet. Other products that
support PCCC objects include the 1203-GU6, 1336-GM6, and
1761-NET-DNI.
efesotomasyon.com - Allen Bradley,Rockwell,plc,servo,drive
To Next Page
Loading...
Need help?
General
