Rockwell Automation Publication 2099-UM001D-EN-P - December 2012 21
Chapter 2
Install the Kinetix 7000 Drive System
This chapter describes system installation guidelines in preparation for mounting
your Kinetix 7000 drive components.
Topic Page
System Design Guidelines 22
Minimizing Electrical Noise 28
Mount the Kinetix 7000 Drive 39
ATTENTION: Plan the installation of your system so that you can perform all
cutting, drilling, tapping, and welding with the system removed from the
enclosure. Because the system is of the open type construction, be careful to
keep any metal debris from falling into it. Metal debris or other foreign matter
can become lodged in the circuitry, which can result in damage to components.
To Next Page
Loading...
Need help?
General
