Name: APRILIA RSV 1000 R FACTORY
Brand: APRILIA
Rating: 5 (1 reviews)

To Next Page

To Previous Page

105

use and maintenance RSV 1000 R - RSV 1000 R FACTORY

VERTICAL ADJUSTMENT OF THE

HEADLIGHT BEAM

NOTE Beam inspection procedures may

vary from country to country. Observe the

law in force in the country of the user.

To set beam height:

◆ Place the vehicle on the stand, see page

60 (PLACING THE VEHICLE ON THE

STAND).

◆ Working from the rear left side of the

front fairing, fit a short cross-headed

screwdriver to the adjuster screw (1) and

adjust as follows:

√ TIGHTEN (clockwise) to raise the beam;

√ SLACKEN (anticlockwise) to lower the

beam.

◆ Repeat process for the right beam.

When finished:

WARNING

Check for proper beam height setting.

CAUTION

The headlights are also fitted with

adjuster screws (2) for horizontal beam

adjustment.

Correct beam horizontal adjustment is

performed at the factory and we advise

against disturbing standard setting,

unless such adjustment is mandatory in

your country.

2 1

Other manuals for APRILIA RSV 1000 R FACTORY

Questions and Answers:

Need help?

Do you have a question about the APRILIA RSV 1000 R FACTORY and is the answer not in the manual?

General