APRILIA RSV 1000 R FACTORY Use And Maintenance Book

106
use and maintenance RSV 1000 R - RSV 1000 R FACTORY
BULBS
Read page 61 (MAINTENANCE)
carefully.
WARNING
Fire hazard!
Keep fuel and other flammable products
away from electric components.
CAUTION
Before proceeding to change a bulb, set
the ignition switch to "" and allow
some time for the bulb to cool down.
Wear clean gloves or use a clean, dry
cloth to handle bulbs. Do not leave your
fingerprints on a bulb, as this may
cause overheating leading to failure.
If you touch a bulb with your fingers,
remove any fingerprints with alcohol to
avoid early failure.
DO NOT PULL ON THE WIRING.
NOTE Check the fuses, see page 103
(REPLACING THE FUSES) before
changing a bulb.
REPLACING THE DASHBOARD
BULBS
If you need assistance or technical advice,
contact your aprilia Official dealer, for
guaranteed accurate, prompt service.

APRILIA RSV 1000 R FACTORY Specifications

General

Engine Type	V-Twin, 4-stroke
Displacement	998 cc
Transmission	6-speed
Max Power	143 hp (107 kW) @ 10, 000 rpm
Max Torque	107 Nm at 7500 rpm
Front Suspension	Öhlins upside-down fork
Rear Suspension	Öhlins monoshock
Front Brakes	Dual 320 mm discs
Rear Brakes	Single 220 mm disc
Dry Weight	185 kg
Fuel Capacity	18 liters
Frame	Aluminum twin spar