EasyManuals Logo

APRILIA RSV 1000 R FACTORY Use And Maintenance Book

APRILIA RSV 1000 R FACTORY
128 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
37
use and maintenance RSV 1000 R - RSV 1000 R FACTORY
Have brake fluid changed every two years
by an
aprilia Official dealer.
WARNING
Do not ride if the braking system is
leaking.
FRONT BRAKE
CHECK
Place the vehicle in vertical position,
keep the handlebar in the direction of
travel.
Make sure that the fluid level in the
reservoir exceeds the "MIN" mark.
MIN= minimum level
MAX= maximum level
If level is below the "MIN" mark:
CAUTION
Brake fluid level decreases gradually as
the brake pads wear down.
Check the brake disk and the brake pads
for wear, see page 93 (CHECKING THE
BRAKE PADS FOR WEAR).
If the pads and/or the disk are in good
condition, top up to correct level.
TOPPING UP
Read page 35 (BRAKE FLUID -
recommendations) carefully.
CAUTION
Danger: brake fluid could leak out.
Never operate the front brake lever
when the screws (1) have been
loosened or when the reservoir cover is
not in place.
Unscrew the screws (1) of the brake fluid
reservoir (2) by means of a short, cross-
headed screwdriver.
2
1

Table of Contents

Other manuals for APRILIA RSV 1000 R FACTORY

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the APRILIA RSV 1000 R FACTORY and is the answer not in the manual?

APRILIA RSV 1000 R FACTORY Specifications

General IconGeneral
Engine TypeV-Twin, 4-stroke
Displacement998 cc
Transmission6-speed
Max Power143 hp (107 kW) @ 10, 000 rpm
Max Torque107 Nm at 7500 rpm
Front SuspensionÖhlins upside-down fork
Rear SuspensionÖhlins monoshock
Front BrakesDual 320 mm discs
Rear BrakesSingle 220 mm disc
Dry Weight185 kg
Fuel Capacity18 liters
FrameAluminum twin spar

Related product manuals