48
use and maintenance RSV 1000 R - RSV 1000 R FACTORY
ADJUSTING THE REAR BRAKE
LEVER AND THE GEAR SHIFT
LEVER
The position of the control levers is
determined based on ergonomic principles
at the factory.
If necessary, it is possible to adjust the
position of the levers.
◆ Place the vehicle on the stand, see page
60 (PLACING THE VEHICLE ON THE
STAND).
◆ Partially unscrew the screw (1).
◆ Rotate the eccentric (2) until finding the
optimal position for the pedal (3).
◆ Tighten the screw (1) and make sure that
the eccentric retains its position.
CAUTION
If the gear shift lever needs further
adjustment, contact an
aprilia Official
dealer.
MUFFLER/EXHAUST SILENCER
WARNING
Tampering with the noise control
system is prohibited.
Owners are warned that the law may
prohibit:
-The removal or disconnection of any
device or element of design incorporated
into any new vehicle to limit the noise
emissions before its sale or delivery to
the final purchaser or while it is in use
except if carried out for maintenance,
repair or replacement purposes.
-The use of the vehicle after the removal or
disconnection of this device or element of
design.
Check the muffler/exhaust silencer and the
silencer pipes for rust or holes. Ensure that
the exhaust system works correctly.
If the exhaust system noise increases,
contact an
aprilia Official dealer
immediately.
WARNING
Both exhaust silencers are equipped
with catalytic converter and become
very hot to the touch. Be careful!
Danger of burns!
To Next Page
Loading...
Need help?
General
