Name: Asus M4A88TD-V EVO
Brand: Asus
Rating: 5 (1 reviews)

To Next Page

To Previous Page

4-14 Chapter 4: Software support

Chapter 4

4.5.3 Setting the RAID item in BIOS

You must enable the RAID function in the BIOS Setup before creating RAID volume(s) using

SATA HDDs. To do this:

1. Enter the BIOS Setup during POST.

2. Go to the Main menu > SATA Conguration, and then press <Enter>.

3. Set the type of the SATA connectors to [RAID].

4. Save your changes, and then exit the BIOS Setup.

See section 3.4.2 SATA Conguration for details.

4.5.2 Installing Serial ATA hard disks

The motherboard supports Serial ATA hard disk drives. For optimal performance, install

identical drives of the same model and capacity when creating a disk array.

To install the SATA hard disks for a RAID conguration:

1. Install the SATA hard disks into the drive bays.

2. Connect the SATA signal cables.

3. Connect a SATA power cable to the power connector on each drive.

E5889_M4A88TD-V EVO_Contents V2.14 14 5/26/10 4:05:51 PM

Questions and Answers:

Need help?

Do you have a question about the Asus M4A88TD-V EVO and is the answer not in the manual?

Asus M4A88TD-V EVO Specifications

General