Deleting a RAID conguration
Take caution when deleting a RAID volume. You will lose all data on the hard disk drives
when you delete a RAID volume.
To delete a RAID volume:
1. In the Main Menu, press <3> to enter the Delete LD function.
2.
Select the RAID item you want to delete and press <Del> or <Alt> + <D>.
Option ROM Utility (c) 2009 Advanced Micro Devices, Inc.
[↑] Up [↓] Down [PaUp/PaDn] Switch page [Del/Alt+D] Delete LD
[ Keys Available ]
[ Delete LD Menu ]
LD No RAID Mode Drv Capacity(GB) Status
LD 1 RAID 0 2 xxxxxx Functional
Dispalying a RAID set information
To display a RAID set information:
1. In the Main Menu, press �2 to enter the “LD View / LD Dene Menu” function.
2. Select a RAID item and press <Enter> to display its information.
Option ROM Utility (c) 2009 Advanced Micro Devices, Inc.
Any Key To Continue.......
[ View LD Denation Menu ]
[ Drives Assignments ]
Port:ID Drive Model Capabilities Capacity(GB)
01:00 xxxxxxxxx xxxxxxx xxxxxx
02:00 xxxxxxxxx xxxxxxx xxxxxx
LD No LD Name RAID Mode Drv Capacity(GB)
LD 1 xxxxx RAID 0 2 157.99
Strip Block 64 KB Cache Mode WriteThru
3. The utility prompts the following messages:
Press <Ctrl> + <Y> to delete the RAID volume.
Press Ctrl-Y to delte the data in the disk!
or press any other key to abort...
To Next Page
Loading...
Need help?
General
