1. Check the readings on the display.
2.
On Full-Feature compressors, regularly check the pressure dew-point on the display of the
control panel. The pressure dew-point will deviate from nominal if the air inlet conditions or
volume differ from nominal.
If the compressor is stopped, it may start automatically.
5.5 Checking the display
Warning
Before carrying out any maintenance, repair work or adjustment, stop the compressor,
press the emergency stop button and switch off the voltage. Close the air outlet valve
and open the manual condensate drain valve.
Description
Reference Designation Function
1 Touchscreen Shows the compressor operating condition and a
number of icons to navigate through the menu.
The screen can be operated by touch.
2 Warning sign Flashes in case of a shut-down, is lit in case of a
warning condition.
3 Service sign Is lit when service is needed.
4 Operation sign Is lit when the compressor is running in automatic
operation.
Instruction book
84 9829 3178 63
To Next Page
Loading...
Need help?
General
