6.7 Storage after installation
Procedure
Run the compressor, e.g. once a week, until warm plus 5–10 minutes.
If the compressor is going to be stored without running from time to time, protective
measures must be taken. Consult the Atlas Copco Customer Centre.
6.8 Service kits
General
Service kits comprise all parts needed for servicing components and offer the benefits of genuine
Atlas Copco parts while keeping the maintenance budget low. All service kits are indicated in the
relevant Parts Lists.
Atlas Copco Roto-Xtend Duty Fluid
Roto-Xtend Duty Fluid can be ordered in the following quantities:
•
5-litre can: 2901 1700 00
• 20-litre can: 2901 1701 00
• 209-litre drum: 2901 1702 00
See Oil specifications.
Instruction book
94 9829 3178 63