Installation Azbil Corporation
2-2 MagneW FLEX+/PLUS+ Electromagnetic Flowmeter Detector
2.2 : Storage
WARNING
Before removing the unit, make sure that there is no residual liquid or pressure
inside the piping and the detector to avoid personal injury or damage to the unit.
When storing this device:
• Store the device indoors at room temperature and humidity, in a place safe from
vibration or shock.
• Store the device in the same condition as it was shipped.
When storing this device after use:
(1) Rinse the inside of the detector with water to remove residual uids and then
allow it to dry.
(2) Firmly attach the terminal box cover and the electrode cover in order to keep out
moisture.
(3) Replace the detector in its original packaging.
(4) Store the device indoors at room temperature and humidity, in a place safe from
vibration or shock.
To Next Page
Loading...
Need help?
General
