Barco DP2K-15C - B.4 Pin Configurations of the Inputs

R5905752 /16 DP2K C170
RJ-45 Pin Number
(Left >Right
copper side)
568A 568B AES -1-8
6 Orange Green AES 3&4
+minus
7 White/Brown White/Brown AES 7&8 +plus
8 Brown Brown AES 7&8
+minus
568A and 568B may be used interchangeably in a system SO LONG AS both ends of a given cable are
terminated the same way.
568A + 568B wiring is a crossover cable.
568A + 568A wiring is a straight cable.
568B + 568B wiring is a straight cable.
The mapping of the channels is done according to the Ethernet wiring scheme and gives us 100 Ohm per pair.
B.4 Pin configurations of the inputs
DVI-D
DVI IN A & B
1 RX2- 7 DDC Data 13 nc 19 RX0 Shield
2 RX2+ 8 nc 14 +5V 20 nc
3 RX2 Shield 9 RX1- 15 GND 21 nc
4 nc 10 RX1+ 16 Hot Plug Detect 22 TMDS Clock Shield
5 nc 11 RX1 Shield 17 RX0- 23 TMDS RXC+
6 DDC Clock 12 nc 18 RX0+ 24 TMDS RXC-
Pin configurations