95R5905752 /16 DP2K C
Image 7–16
1 Power / Error LED
2 Ready LED
Status overview PWR/ERROR and READY LEDs:
PWR/ERROR READY ICMP-X Status
Off Off Turned off
Red Off Board reset or FIPS error
Blinking Green Off Boot loader
Blinking Green Blinking Orange Operating System start up
Blinking Green Orange Security Manager - Image Integrity tests
Blinking Green Blinking Yellow Security Manager - Self Test
Blinking Green Yellow Security Manager - FPGA self-test
Green Blinking Green Starting Applications
Green Green Applications started in normal mode
Green Orange Applications started in degraded mode
Blinking Red Off FIPS error
Green Blinking Orange Update ongoing
Orange Orange Update done
7.8 ICMP-X device certificate
Purpose of the Barco ICMP-X device certificate
The device certificate (*. pem) of the Barco ICMP-X is a digital certificate signed by Barco which is required
when ordering the KDM
2
to play a DCP that is ingested on the ICMP-X. The device certificate is stored inside
the ICMP-X and on a web server.
The (WEB) Commander or Communicator can be used to retrieve the device certificate directly from the
ICMP-X. To retrieve the device certificate from the website the QR (Quick Response) code can be used. See
procedure “Obtaining the ICMP-X certificate”, page 97.
ICMP-X
2. For China mainland LDM is used next to KDM. LDM specifies also a maximum number of shows.
To Next Page
Loading...
Need help?
General