BLUM MINIPRESS User Manual

14
D
Initial set-up of MINIPRESS

!
XXX V / XX HZ
mwttttt mmmmtm tmttt ttt tmttttttmt mttt mwttttt mmm
mwttttt
mwtttttmm mmtm tmttt ttt tmttttttmt mtt
mwttttt mmm
mwtt tttmmhb nhnhn hhnh nmmtm tmttt ttt tmtttlkl kll lkkltttmt mttt
mwttttt mmhb nhnhn hhnh nmmtm tmttt ttt tmtttlkl kll lkkltttmt mttt
mwttttt mmm
mwttttt mmhb nhnhn hhnh nmmtm tmttt ttt tmtttlkl kll lkkltttmt mttt
mwttt ttmmm
mwttttt mmhb nhnhn hhnh nmmtm tmttt ttt tmtttlkl kll lkkltttmt mttt
mwttttt mmhb nhnhn hhnh nmmtm tmttt ttt tmtttlkl kll lkkltttmt mttt
mwttttt
mwt
mwt
m
w
t
m
w
t
m
w
t
m
w
t
m
w
t
m
w
t
m
w
t
m
w
t
m
w
t
m
w
t
m
w
t
m
w
t
m
w
t
m
w
m
w
t
m
w
t
m
w
t
m
w
mw
mw
m
w
m
w
m
w
m
w
m
w
m
w
m
w
m
w
mw
m
w
mw
m
w
m
w
1.
2.
3.
Electrical connection Dust extraction
Warning:
Electrical wiring shall be
carried out by an
authorized electrician only!
1. Electrical connection
• Set main switch (E1) to set up
position.
• Mount a plug conforming to NEC.
This machine must be connected
through a circuit breaker
(see wiring diagram).
Important:
The machine has been
prepared for the voltage
printed on the label of the
connection cable.
1. This machine may be connected
to a dust extraction system.
• Insert a spiral hose with an inside
diameter of 3-1/8“ (80 mm) into the
receiving tube and fix it.
• If no 3-1/8“ (80 mm) extraction
connection is available, use the
adapters (illus. 2) supplied
with the machine.
%$0,1,35(66)$,G1US $0

BLUM MINIPRESS Specifications

General

Brand	BLUM
Model	MINIPRESS
Category	Power Tool
Language	English