BLUM MINIPRESS User Manual

4
B

Safety instructions
DANGER
!
KEEP HANDS OUT
DANGER
KEEP HANDS OUT
!
• Keep hands and fingers away from drill
bits while the machine is power
connected, even if it is not running.
• Never attempt to operate machine
without the guards in place.
• Never move your hands in the area of
pinch points.
Safety rules
• This machine is designed for
commercial and industrial
applications and shall be used by
fully trained professionals only.
The machine is only intended for the
drilling and insertion of Blum
hardware into panels of wood,
particle board, or laminated particle
board.
• Always place operation mode switch
to „set up“ position and disconnect
the power (unplugged) before
performing any work on the drill
heads, fences or stops.
• Keep work area clean. Cluttered
areas and work stations increase the
chance of accidents.
• Protect yourself from electrical
shock. Do not use this machine in
damp or wet locations, or expose it
to rain.
• Consider environmental factors and
local laws when setting-up and
operating the machine.
• The hold-down clamps or other
adequate means must be used to
secure the panel during the
operation.
• Observe the location of the control
switches and become familiar with
their operation.
• Wear proper clothing. Do not wear
shirts with bulky sleeves and ties
that could be caught in moving
parts.
• Do not wear jewelry when operating
this machine. Individuals with long
hair should wear a hairnet to protect
their hair from moving parts.
%$0,1,35(66)$,G1US $0

BLUM MINIPRESS Specifications

General

Brand	BLUM
Model	MINIPRESS
Category	Power Tool
Language	English