18
F
Drilling of hinge pattern
!
F1F2 F2 F3
F4
2-1/4"
(57 mm)
Drilling of hinge pattern
1. Necessary parts
• drill bits:
- one 35 mm dia. rotating clockwise
(F1) (marked black).
- two 8 mm dia. rotating counter-
clockwise (F2) (marked orange).
• Two cover caps (F3)
• Insertion ram MZM.XXXX (F4).
See Blum catalog for correct ram.
• Door panel
• Hinge
2. drill-bit length
• The max length of the drill bits (from
bit-tip to adjustment screw) shall be
2 -1/4“ (57 mm).
• To correct drill-bit length, adjust
screw accordingly.
Important:
All drill bits shall be the same
length!
%$0,1,35(66)$,G1US $0
To Next Page
Loading...
Need help?
General
