BLUM MINIPRESS User Manual

16
E
Description of operating panel


!
drill/press
stroke
drill/press
stroke
drill/press
stroke
+
+
+
R
R
D10
D9
E1
E2
A
E2
set up
drill/press
Auto
off
drill/press
stroke
Warning:
Keep your hands out of
working area (A) of the
machine when performing
the tasks below!
4. Checking the motor rotation
• Set main switch (E1) to
drill / press position.
• Briefly touch the drill / press stroke
button (E2).
• The motor fan (D9) must rotate in
the direction of the arrow (D10).
Note:
If you press the drill / press
stroke button (E2) by only a
few mm (1/16"), the drilling
and pressing unit will move
down at a slower speed.
5. Drill / press stroke button (E2)
Warning:
Keep your hands away from
the working area (A) of the
machine when pressing the
drill / press stroke button.
By pressing the drill / press stroke
button, one of the following preselected
operations is carried out.
set-up:
main switch to set up
position + drill /
press stroke button
pressed
drilling:
main switch to drill /
press position + drill
/ press stroke button
pressed
insertion of fitting:
Swing Arm retracted
+ drill / press stroke
button pressed
%$0,1,35(66)$,G1US $0

BLUM MINIPRESS Specifications

General

Brand	BLUM
Model	MINIPRESS
Category	Power Tool
Language	English