5
B
Safety instructions
• Before every use of the machine,
make sure that all safety devices
and parts of the machine function
properly. Any defective safety
devices and accessories must be
repaired or exchanged by a qualified
service technician only.
• Do not overreach. Keep proper
footing and balance at all times.
• CAUTION: For your own safety, use
only those accessories which are
recommended or indicated in the
manual or Blum sales literature.
• All accessories and attachments
must be installed as described in the
manual to assure a proper and safe
operation of the machine.
• Maintain tools with care. Keep tools
sharp, clean and organized for the
best and safest performance. Follow
instructions for lubricating and
changing accessories.
• Protect electrical and pneumatic
lines from heat, oil, traffic, sharp
edges, etc.
• Do not use cables and pneumatic
lines for purposes other than those
originally intended.
• The actual noise levels in your work
area may vary. Appropriate hearing
protection may be necessary. This
determination must be made by the
user with consideration for the entire
working environment and any
applicable regulation. Factors liable
to influence current immission levels
in the workplace include the length
of exposure, the characteristics of
the workroom, and other noise
sources.
• This machine, being cord and plug
connected is in compliance with
OSHA regulations 1910.147 (lock-out
/ tag-out) and does not require
padlocks or other locking devices.
• For any question or problem with the
machine, contact the Blum
Customer Service Department:
1-800-438-6788
%$0,1,35(66)$,G1US $0
To Next Page
Loading...
Need help?
General
