RESmart GII BPAP System Y / U Series User Manual V2.1
24 / 42
13.2 Options of the Patient Menu and Corresponding
Descriptions
There are five humidity levels available. As the numbering
increases, the humidity rises accordingly. “Off” means the
humidifier is turned off. The default setting is “2”
This feature enables the device to automatically reduce the
treatment pressure when the patient exhales, so as to make the
user more comfortable. The higher the numbering is, the more
pressure the device reduces. “Off” means this feature is
disabled. The default setting is “Off”
In order to increase comfort and help the patient fall asleep
easily, the pressure can increase gradually, when the Ramp
feature is enabled. The ramp time during which the initial
pressure rises to the prescribed treatment pressure can be
adjusted. As you turn the Knob to the nearest point, the
numbering increases or decreases by five minutes. The default
setting is “10 minutes.” The screen displays a real-time
countdown of the remaining ramp time in minutes
When the humidifier is on, this feature allows the airflow to
continue for about 15 minutes at a low pressure (about 2 hPa)
after you press the Knob to discontinue treatment. This
will blow off the vapor left in the humidifier to avoid any
damage to the device. When this feature is set to “Off,” which
means it is disabled, the airfolw stops delivering air instantly
after you press the Knob . The default setting is “Off”
Setting date by adjusting this option
Setting time by adjusting this option
Setting screen brightness by adjusting this option. The default
setting is “High”
Full Face;
Nasal;
Pillow;
Other
There are three mask types available, namely Full Face
(full-face mask), Nasal (nasal mask), and Pillow (nasal pillow
mask). The default mask type is “Nasal,” but the patient can
choose other suitable masks as well. When selecting masks
other than the above three types of masks, the patient can
identify the masks as Other
iCode, iCode
QR, iCode
QR+
iCode provides access to the patient's compliance data during a
recent time period. The iCode mode displays data in sequences
of characters. The iCode QR and iCode QR+ mode display data
in two-dimensional codes
Use Time displays how long has the device been used by the
user. The use time can be erased
To Next Page
Loading...
General