H60 Heated Humidifier User Manual V2.0
2 / 21
3. Features
Air Outlet
Water Level
Observation Window
Humidifier
Uncover Button
Connector
Air Inlet
Humidifier
Separation Button
Fig. 3-1
Connect to the outlet of the main device
Deliver humidified air to the patient; connect to the air
tubing
Heat the water in the water chamber and detect the
temperature
Water Level Observation
Window
Observe the water level in the water chamber
Humidifier Uncover Button
Press this button to open the top cover of the humidifier
Humidifier Separation
Button
Press this button to separate the humidifier from the main
device
4. Daily Use
IMPORTANTS!
• Never operate the humidifier if any of its parts are damaged, if it is not working properly, or if
the humidifier has been dropped or mishandled. Do not use the humidifier if the water chamber
is leaking or damaged in any way. Have any damaged parts replaced before continuing use.
• Read all instructions before using the humidifier.
• Use only with BMC devices whose instructions specify the use of this humidifier.
• Please use the mask which meets ISO17510:2015.
CAUTIONS!
• This equipment is not suitable for use in the presence of a flammable anesthetic mixture
with air or with oxygen or nitrous oxide.
• Do not operate the device in direct sunlight or near a heating appliance because these
conditions can increase the temperature of the air coming out of the device.
• When humidifier is used outside the specified ambient temperature range or humidity
range, the performance of humidifier will be compromised.
• U.S. federal law restricts this device to sale by or on the order of a physician.
To Next Page
Loading...
General