BMW F 800 GT User Manual

switching off the ignition to re-
duce the strain on the onboard
electrical system. Additional
devices with low power con-
sumption are possibly not de-
tected by the vehicle electron-
ics. In these cases, onboard
sockets are already switched
off shortly after the ignition is
switched off.
In case of insufficient battery
voltage, the onboard sockets
are switched off to maintain the
ability to start the motorcycle.
If the maximum loadability
specified in the technical data
is exceeded, the onboard
sockets are switched off.
Case
Opening case
with case
OA
Turn key 1 to position OPEN.
Pull gray release lever 2
(OPEN) upward and
simultaneously open case lid.
Closing case
with case
OA
Turn key 1 to position OPEN.
Press catches 2 of case lid into
retainers 3. Ensure that no lug-
gage is trapped between lid
and case.
Pull gray release lever 4
(OPEN) upward and
simultaneously close case lid.
The lid clicks audibly into place.
Turn key 1 in case lock in the
direction of travel and remove.
Removing case
with case
OA
10
123
z Accessories

BMW F 800 GT Specifications

General

Displacement	798 cc
Max Power	90 hp (66 kW) @ 8, 000 rpm
Max Torque	86 Nm (63 lb-ft) @ 5, 800 rpm
Transmission	6-speed
Seat Height	800 mm (31.5 inches)
Curb Weight	213 kg (470 lbs)
Fuel System	Electronic fuel injection
ABS	Standard
Fuel Capacity	15 l
Front Suspension	Telescopic fork
Engine Type	Liquid-cooled, 4-stroke, in-line two-cylinder
Front Brakes	Dual 320 mm discs, 4-piston calipers
Rear Brakes	Single 265 mm disc, single-piston caliper