In order to adjust different damp-
ing:
Press button 1 repeatedly until
the desired setting is displayed
in the multifunction display.
NOTICE
The damping cannot be adjusted
while the motorcycle is being
ridden.
If button 1 is not pressed for a
longer time, damping is set as
indicated.
The ESA display disappears
once the adjustment procedure
has been completed.
Riding mode
Use of the riding modes
BMW Motorrad has developed
3 riding scenarios for your motor-
cycle from which you can select
the one matching your situation:
Riding on wet roads.
Riding on dry roads.
with riding modes Pro
OE
Brisk riding on dry roads.
For each of those 3 scenarios,
the optimum balance between
throttle response, ABS and ASC
control is provided.
NOTICE
Detailed information regarding
the off-road mode can be found
in the section entitled "Technol-
ogy in detail."
Setting riding mode
Switch on ignition ( 40).
NOTICE
If a riding mode was selected
prior to switching the ignition
off, it remains further active after
switching the ignition on again.
Actuate MODE 1.
The selection arrow 2 is dis-
played.
Actuate MODE 1 enough
times for the selector arrow 2
to point to the desired riding
mode.
The most recent riding mode
setting 3 remains on the
display.
While parked:
Activation takes place after ap-
prox. 2 seconds.
While in motion, the selected
riding mode is activated pro-
4
50
z
Operation
To Next Page
Loading...
Need help?
General
