NOTICE
If the alarm function is
deactivated by means of the
remote control and the ignition
then not switched on, the
alarm function is automatically
reactivated after 30 seconds if
"Activation after ignition off" has
been programmed.
Actuate the 1 button on the re-
mote control once or switch on
the ignition with an authorized
ignition key.
Turn indicators light up once.
Alarm tone sounds once (if
programmed).
Alarm function is deactivated.
Protection of the battery
(DWA activated)
After approx. one hour in the
activated state, the receiver
for the remote control in the
DWA switches off to protect the
battery. The ignition must be
switched on to deactivate the
alarm function after this period.
Programming
with anti-theft alarm system
(DWA)
OE
Programming options
The anti-theft alarm system can
be adapted to individual needs in
the following points:
Confirmation alarm tone after
activation/deactivation of the
DWA in addition to the turn
signals lighting up.
Rising and falling or intermittent
alarm tone.
Automatic activation of the
alarm function when the igni-
tion is switched off.
Factory settings
The anti-theft alarm system is
delivered with the following fac-
tory settings:
Confirmation alarm tone after
activation/deactivation of the
DWA: no.
Alarm tone: intermittent.
Automatic activation of the
alarm function when the igni-
tion is switched off: no.
5
57
z
Alarm system
To Next Page
Loading...
Need help?
General
