Apply uniform pressure to push
front wheel stand down and
raise motorcycle.
with center stand
OE
ATTENTION
Lifting-off of the center stand
if the vehicle is raised too
high
Component damage cause by
tipping over
When raising the motorcy-
cle, make sure that the center
stand remains on the ground.
Adjust the height of the front
wheel stand if necessary.
Ensure motorcycle is standing
securely.
Rear-wheel stand
Mounting rear-wheel
stands
Make sure ground is level and
firm and park motorcycle.
Use basic stand with rear
wheel adapter. The basic
stand and its accessories
are available through your
authorized BMW Motorrad
retailer.
Set desired height of rear-
wheel stand using bolts 1.
Remove the lock washer 2; to
do so, press the unlock but-
ton 3.
9
92
z
Maintenance
To Next Page
Loading...
