BMW F 800 GT User Manual

Confirmation of maintenance work
BMW Service standard scope
The activities of the BMW Service standard scope are listed in the following. The actual scope of mainte-
nance work applicable for your vehicle may differ.
Performing the vehicle test using the BMW Motorrad diagnosis system
Checking coolant level
Checking/adjusting clutch play
Checking front brake pads and brake disks for wear
Checking rear brake pads and brake disk for wear
Checking front brake fluid level
Checking rear brake fluid level
Visually inspect the brake lines, brake hoses and connections
Checking tire pressure and tread depth
Checking the toothed belt(s)
Checking the belt tension
Checking steering-head bearing
Checking side stand for ease of movement
Checking the rear main-frame screw connection for nominal torque
Checking the screw connection of the rider's footrest plates on the left- and right-hand side for nominal
torque
Checking the eccentric clamp for nominal torque
Checking the lighting and signal system
Functional check for engine starting suppression
Final inspection and check for road safety
13
152
z Service

BMW F 800 GT Specifications

General

Displacement	798 cc
Max Power	90 hp (66 kW) @ 8, 000 rpm
Max Torque	86 Nm (63 lb-ft) @ 5, 800 rpm
Transmission	6-speed
Seat Height	800 mm (31.5 inches)
Curb Weight	213 kg (470 lbs)
Fuel System	Electronic fuel injection
ABS	Standard
Fuel Capacity	15 l
Front Suspension	Telescopic fork
Engine Type	Liquid-cooled, 4-stroke, in-line two-cylinder
Front Brakes	Dual 320 mm discs, 4-piston calipers
Rear Brakes	Single 265 mm disc, single-piston caliper