To Next Page

To Previous Page

Front wheel stand

Mounting front wheel

stand

ATTENTION

Use of the BMW Motorrad

front wheel stand without an

auxiliary stand

Component damage cause by

tipping over

Place the motorcycle on an

auxiliary stand before lifting

the front wheel with the

BMW Motorrad front-wheel

stand.

Place motorcycle on an auxil-

iary stand; BMW Motorrad rec-

ommends BMW Motorrad rear-

wheel stand.

Mount rear-wheel stands

( 92).

with center stand

Make sure ground is level and

firm and place motorcycle on

center stand.

Use basic stand with front

wheel mount. The basic stand

and its accessories are avail-

able through your authorized

BMW Motorrad retailer.

Loosen mounting screw 1.

Push the two mounts 2 far

enough apart that the tele-

scopic fork fits between them.

Use locating pins 3 to set front

wheel stand to desired height.

Center front wheel stand rela-

tive to front wheel and push it

against front axle.

Align the two mounts 2 so that

the telescopic fork rests se-

curely on them.

Tighten mounting screw 1.

Maintenance

Questions and Answers:

Need help?

Do you have a question about the BMW F 800 GT and is the answer not in the manual?

BMW F 800 GT Specifications

General

Displacement	798 cc
Max Power	90 hp (66 kW) @ 8, 000 rpm
Max Torque	86 Nm (63 lb-ft) @ 5, 800 rpm
Transmission	6-speed
Seat Height	800 mm (31.5 inches)
Curb Weight	213 kg (470 lbs)
Fuel System	Electronic fuel injection
ABS	Standard
Fuel Capacity	15 l
Front Suspension	Telescopic fork
Engine Type	Liquid-cooled, 4-stroke, in-line two-cylinder
Front Brakes	Dual 320 mm discs, 4-piston calipers
Rear Brakes	Single 265 mm disc, single-piston caliper