BMW F 800 GT User Manual

heating of the grips; the switch
should then be switched back to
the first level.
Approx. 50 % heater out-
put
100 % heating output
If no further changes are made
the selected heating level is
adopted as the setting.
To switch off the heated grip,
press button 1 repeatedly until
heated grip symbol 2 is not
shown anymore in the display.
Seat
Removing the seat
Make sure ground is level and
firm and park motorcycle.
Turn and hold ignition key in
the seat lock 1 to left while
pressing seat downward at rear
to support movement.
Raise seat at rear and release
key.
Take off seat and place on a
clean surface with upholstered
side facing downward.
Installing the seat
Insert seat in bracket 1 and
press down firmly at rear.
The seat's detent mechanism
will be heard to engage.
4
52
z Operation

BMW F 800 GT Specifications

General

Displacement	798 cc
Max Power	90 hp (66 kW) @ 8, 000 rpm
Max Torque	86 Nm (63 lb-ft) @ 5, 800 rpm
Transmission	6-speed
Seat Height	800 mm (31.5 inches)
Curb Weight	213 kg (470 lbs)
Fuel System	Electronic fuel injection
ABS	Standard
Fuel Capacity	15 l
Front Suspension	Telescopic fork
Engine Type	Liquid-cooled, 4-stroke, in-line two-cylinder
Front Brakes	Dual 320 mm discs, 4-piston calipers
Rear Brakes	Single 265 mm disc, single-piston caliper