BMW K1300R - ASC Warnings

ABS self-diagnosis not
completed
ABS warning light flashes.
Possible cause:
The ABS function is not
available, because self-
diagnosis did not complete. The
motorcycle has to move forward
a few metres for the wheel
sensors to be tested.
Pull away slowly. Bear in mind
that the ABS function is not
available until self-diagnosis has
completed.
ABS deactivated
ABS warning light shows.
Possible cause:
The rider has switched off the
ABS system.
with BMW Motorrad Integral
ABS II
OE
Activating ABS function
( 59).
ABS fault
ABS warning light shows.
Possible cause:
The ABS control unit has detec-
ted a fault. The ABS function is
not available.
You can continue to ride the
motorcycle, but make due pro-
vision for the fact that the ABS
function is not available. Bear
in mind the more detailed in-
formation on situations that can
lead to an ABS fault ( 87).
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
ASC warnings
Mode of presentation
with Automatic Stability Con-
trol
OE
ASC warnings are indicated by a
combination of the ASC warning
symbol 2 and 'General' warning
light 1.
The detailed descriptions relating
to BMW Motorrad ASC start on
page ( 88), and you will find
an overview listing the possible
warnings on the next page.
3
34
z Status indicators