EasyManuals Logo

BMW K1300R User Manual

BMW K1300R
169 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #67 background imageLoading...
Page #67 background image
Push the protective cap over
the threaded fastener.
Spring preload
Setting
It is essential to set spring pre-
load of the rear suspension to
suit the load carried by the mo-
torcycle. Increase spring preload
when the motorcycle is heavily
loaded and reduce spring preload
accordingly when the motorcycle
is lightly loaded.
Adjust the spring preload
for rear wheel
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Your motorcycle's hand-
ling will suffer if you do not
match the spring-preload and
damping-characteristic settings.
Adjust the damping characteristic
to suit spring preload.
Adjusting spring preload
while the motorcycle is be-
ing ridden can lead to accidents.
Do not attempt to adjust spring
preload unless the motorcycle is
at a standstill.
If you want to increase spring
preload, turn knob 1 in the dir-
ection indicated by the HIGH
arrow.
If you want to reduce spring
preload, turn knob 1 in the dir-
ection indicated by the LOW
arrow.
Basic setting of spring
preload, rear
without Electronic Suspen-
sion Adjustment (ESA II)
OE
Turn the knob as far as it will
go in the direction indicated
by the LOW arrow and then
turn it back 13 clicks in the
direction indicated by the
HIGH arrow. (Full load of
fuel, with rider 85 kg)
Damping
Setting
Damping must be adapted to suit
the surface on which the motor-
cycle is ridden and to suit spring
preload.
4
63
z
Operation

Table of Contents

Other manuals for BMW K1300R

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the BMW K1300R and is the answer not in the manual?

BMW K1300R Specifications

General IconGeneral
Displacement1293 cc
Transmission6-speed
Fuel Capacity19 liters (5.0 US gal)
Seat Height820 mm (32.3 in)
Bore x Stroke80 mm x 64.3 mm
Compression Ratio13.0:1
Fuel SystemElectronic fuel injection
Final DriveShaft
Rear BrakeSingle 265 mm disc, 2-piston caliper
Front Tire120/70 ZR17
Rear Tire180/55 ZR17
Dry Weight217 kg (478 lb)
Engine TypeLiquid-cooled, 4-stroke in-line four-cylinder
Power173 hp (129 kW) at 9, 250 rpm
Torque140 Nm at 8, 250 rpm
Weight243 kg
Front SuspensionDuolever
Rear SuspensionParalever
Front BrakeDual 320 mm discs, 4-piston calipers

Related product manuals