BMW K1300R User Manual

ABS warning light remains
ON.
The ABS function is deactiv-
ated, but the integral function
remains active.
Activating ABS function
Press and hold down button 1
until the ABS warning light
changes status.
ABS warning light goes out;
if self-diagnosis has not
completed it starts flashing.
Release the ABS button within
two seconds.
The ABS warning light re-
mains off or continues to
flash.
The ABS function is activated.
You also have the option of
switching the ignition off and
then on again.
If you switch the ignition off
then on again and the ABS
light comes back on, there is a
fault in the ABS.
Automatic Stability
Control ASC
with Automatic Stability Con-
trol
OE
Deactivating ASC function
Switch on the ignition.
You have the option of de-
activating the ASC function
while the motorcycle is on the
move.
Press and hold down ASC but-
ton 1.
ASC symbol shows con-
stantly.
Release the ASC button within
two seconds.
ASC symbol continues to
show.
The ASC function is deactiv-
ated.
4
59
z Operation

BMW K1300R Specifications

General

Displacement	1293 cc
Transmission	6-speed
Fuel Capacity	19 liters (5.0 US gal)
Seat Height	820 mm (32.3 in)
Bore x Stroke	80 mm x 64.3 mm
Compression Ratio	13.0:1
Fuel System	Electronic fuel injection
Final Drive	Shaft
Rear Brake	Single 265 mm disc, 2-piston caliper
Front Tire	120/70 ZR17
Rear Tire	180/55 ZR17
Dry Weight	217 kg (478 lb)
Engine Type	Liquid-cooled, 4-stroke in-line four-cylinder
Power	173 hp (129 kW) at 9, 250 rpm
Torque	140 Nm at 8, 250 rpm
Weight	243 kg
Front Suspension	Duolever
Rear Suspension	Paralever
Front Brake	Dual 320 mm discs, 4-piston calipers